Quote Inquiry

Home

Product Center

Email:laicaieven@gmail.com

WhatsApp：+86 17710715268

Address:516, 5th Floor, Building 4, No. 7 Guangyang New Road, Fangshan District, Beijing

European-style cable split-box

European-style cable split-box is widely used in power distribution network system in recent years, the cable engineering equipment, its main characteristics are two-way door, the use of wall sleeve as a connection busbar, with a small length, clear cable arrangement, three-core cable does not need large span cross and other significant advantages. The cable connector used is GB/T12706.4 standard, and the cable connector is generally fixed by bolts with rated current 630A. The box can be provided in a variety of colors according to user requirements.

model:

Commodity name： European-style cable split-box

Category:

Electrical power equipment

Email:

Phone:

Product Description

Product introduction

European-style cable split-box is widely used in power distribution network system in recent years, the cable engineering equipment, its main characteristics are two-way door, the use of wall sleeve as a connection busbar, with a small length, clear cable arrangement, three-core cable does not need large span cross and other significant advantages. The cable connector used is GB/T12706.4 standard, and the cable connector is generally fixed by bolts with rated current 630A. The box can be provided in a variety of colors according to user requirements.

Adapt to the environment
- Ambient temperature: Maximum temperature: +50℃, minimum temperature: -50℃
- Wind speed: 34m/s (not greater than 700Pa)
- Humidity: The average daily relative humidity shall not exceed 95%, and the average monthly relative humidity shall not exceed 95%
- Anti-vibration: The horizontal acceleration shall not exceed 0.4m/s², and the vertical acceleration shall not exceed 0.15m/s²
- The inclination of the installation site: no more than 3°
- Installation environment: The surrounding air should not be significantly polluted by corrosive, flammable gases, water vapor, etc., and the installation site should not have severe vibration. (Note: If the order of this product exceeds the above conditions, please negotiate with our company.)
Product Model Description

Technical Parameters

Order Information (Box Configuration Plan)

Structural example Diagram of European-style Cable Distribution box

If the space is limited and cable distribution boxes cannot be placed, cable joints can be directly combined to form multiple cable branches (no busbars are required; the connection method is shown in the following example) and placed in the cable trench or other locations.

Example One: Four-way incoming and outgoing lines

Each phase is composed of two European front plugs and two European rear plugs, and is connected by a European docking sleeve in the middle. The end of the European-style rear plug is sealed with insulators and semiconductive end covers. The example is shown in the following figure.

Example Two: Two inputs and three outputs

Each phase consists of two European front plugs and three European rear plugs, which are connected in the middle by European butt sockets. The end of the European-style rear plug is sealed with insulators and semiconductive end covers. The example is shown in the following figure.